elektronische bauelemente sm30200d voltage 200 v 30a schottky barrier rectifiers 03-jan-2014 rev. b page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed i ndividually. rohs compliant product a suffix of -c specifies halogen & lead-free features low forward voltage drop high current capability high reliability high surge current capability epitaxial construction mechanical data case: molded plastic epoxy: ul94v-0 rate flame retardant lead: lead solderable per mil-std-202 method 208 guaranteed polarity: as marked mounting position: any weight: 2.24 grams package information package mpq leader size to-263 0.8k 13 inch maximum ratings (rating 25 c ambient temperature unless otherwise specified. s ingle phase half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20%.) parameter symbol rating unit maximum repetitive peak reverse voltage v rrm 200 v maximum rms voltage v rms 140 v maximum dc blocking voltage v dc 200 v maximum average forward rectified current i f 30 a peak forward surge current, 8.3 ms single half sine-w ave superimposed on rated load i fsm 200 a maximum instantaneous forward voltage @ 15a v f 0.90 v t a =25c 0.1 maximum reverse current at rated vrrm per diode 3 t a =100c i r 5 ma typical junction capacitance 1 c j 220 pf voltage rate of change dv/dt 10000 v/us typical thermal resistance 2 r jc 6 c/w operating & storage temperature t j ,t stg -55~150 c notes: 1. measured at 1mhz and applied reverse voltage of 4.0v d.c. 2. thermal resistance junction to case. fr4 board h eat sink size: 10*10*0.2mm. 3. plus test: 300us pulse width, 1% duty cycle.. to-263(d 2 -pack) millimeter millimeter ref. min. max. ref. min. max. a 4.00 4.85 c 2 1.10 1.65 b 0.51 1.00 b 2 1.34 ref l4 0.00 0.30 d 8.0 9.65 c 0.30 0.74 e 2.54 ref l3 1.50 ref l 14.6 15.88 l1 1.78 2.79 l2 1.27 ref e 9.60 10.67 1 11 1 2 22 2
elektronische bauelemente sm30200d voltage 200 v 30a schottky barrier rectifiers 03-jan-2014 rev. b page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed i ndividually. ratings and characteristic curves
|
